Methylene Chloride Technology The most highly effective organic solvent that penetrates and lifts the majority of paint coatings while not harming wood, metal and masonry substrates.
Zip-Strip<sup>®</sup> Trigger Spray image

Zip-Strip® Trigger Spray Paint & Finish Remover.

Zip-Strip® Trigger Spray Paint & Finish Remover is designed with easy application in mind. Its special formula sprays as a liquid so it penetrates into hard-to-get places like scrollwork, carving, spindles and filigree. Upon contact, Trigger Spray gels to a semi-paste consistency with clingability so it stays put, even on vertical surfaces. A fine initial spray begins the softening process. After five minutes spray a second time to activate further penetration, removing four to five coats or more.

Zip-Strip® Trigger Spray Paint & Finish Remover strips household paints and clear finishes, enamel, oil and latex paint, urethane, polyurethane, shellac, lacquer, water-based finish and spar varnish. It is non-flammable, and excellent for interior as well as exterior use. Just spray it on and remove with steel wool, a scraper or even wash off with water (Use of water may loosen veneer or raise wood grain. This would make it necessary to re-glue veneer or to sand the wood after it is thoroughly dry, prior to refinishing).

Capable of removing 4-5 coats of paint

Available in quarts, gallons, 5-gallon pails. Quarts and gallons come with a free spray bottle attached to each can.
Zip-Strip® Trigger Spray
code   sheen / type size case pack
273105 Product Photo Not Available Paint & Finish Remover 5Gal. 1
273101 Product Photo Paint & Finish Remover Gal. 2
273104 Product Photo Not Available Paint & Finish Remover Qt. 4